bullnose metal trim

STANDARD 5/8″ 90º BULLNOSE CORNERBEAD WITH 3/4″ RADIUS

To give you a superior joint compound adhesion and maximum protection for a professionally finished corner, Clinch-On manufactures its 3/4″ radius 5/8″ standard flange 90º bullnose cornerbead with its proprietary coated steel and a deep knurling (embossing). Our 5/8″ flange provides you with liberal installation space for nailing, stapling, screwing or clinching our cornerbead to drywall. Our proprietary steel coating gives our cornerbead a dark (dull) appearance and superior adhesion qualities compared to shiny hot dipped galvanized steel. Our standard 5/8″ 90º bullnose cornerbead with a 3/4″ radius is designed for 90º outside corners.

STANDARD 5/8″ 90º BULLNOSE CORNERBEAD WITH 3/4″ RADIUS

To give you a superior joint compound adhesion and maximum protection for a professionally finished corner, Clinch-On manufactures its 3/4″ radius 5/8″ standard flange 90º bullnose cornerbead with its proprietary coated steel and a deep knurling (embossing). Our 5/8″ flange provides you with liberal installation space for nailing, stapling, screwing or clinching our cornerbead to drywall. Our proprietary steel coating gives our cornerbead a dark (dull) appearance and superior adhesion qualities compared to shiny hot dipped galvanized steel. Our standard 5/8″ 90º bullnose cornerbead with a 3/4″ radius is designed for 90º outside corners.

STANDARD 5/8″ 90º BULLNOSE CORNERBEAD WITH 3/4″ RADIUS

To give you a superior joint compound adhesion and maximum protection for a professionally finished corner, Clinch-On manufactures its 3/4″ radius 5/8″ standard flange 90º bullnose cornerbead with its proprietary coated steel and a deep knurling (embossing). Our 5/8″ flange provides you with liberal installation space for nailing, stapling, screwing or clinching our cornerbead to drywall. Our proprietary steel coating gives our cornerbead a dark (dull) appearance and superior adhesion qualities compared to shiny hot dipped galvanized steel. Our standard 5/8″ 90º bullnose cornerbead with a 3/4″ radius is designed for 90º outside corners.

KERF BULLNOSE TRIM CORNERBEAD WITH 3/4″ RADIUS

Clinch-On kerf bullnose cornerbead trim with a 3/4″ radius is easy to install into a kerf cut and is an alternative to the “J” bullnose trim. Our 5/8″ flange provides you with liberal installation space for nailing, stapling or screwing our cornerbead to drywall.

 

CB06

WIDTH A

WIDTH B

1-1/4"

1-1/4"

PRODUCT CODE

CB07

1-1/4"

1-1/4"

CB08

CB09

CB10

CB12

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

FT PER PALLET

LENGTH

6'

7'

8'

9'

10'

12'

FT PER BOX

600

602

600

603

600

600

BOX / PALLET

40

40

40

40

40

40

24,000

24,080

24,000

24,120

24,000

24,000